More Indian ISPs are moving from copper and cable networks to fibre to the home (FTTH). Subscribers want faster plans, competition from national telcos is growing, and fibre networks are cheaper to run once they are built. This guide explains the benefits of a fiber cable connection from an ISP’s point of view, what an FTTH network needs, and how to move your subscribers without disruption.
What is a fiber cable connection (FTTH)?
FTTH, or fibre to the home, means the optical fibre cable runs all the way from the ISP’s network to the subscriber’s premises. Data travels as pulses of light through thin glass strands, instead of electrical signals through copper wire. At the subscriber’s end, a small device called an ONU or ONT converts the light signal into a normal Ethernet or Wi-Fi connection.
Fiber vs copper vs wireless
| Fiber (FTTH) | Copper / cable | Wireless (point-to-multipoint) | |
|---|---|---|---|
| Speeds you can sell | 100 Mbps to 1 Gbps and beyond | usually up to 100 Mbps | depends on distance and line of sight |
| Distance without signal loss | several km (typically up to about 20 km on GPON) | about 100 m per Ethernet run | limited by line of sight |
| Affected by electrical interference | no | yes | affected by weather and obstructions |
| Faults and maintenance | low | higher (corrosion, lightning, power) | moderate |
| Upgrade path | change equipment, keep the cable | often needs new cabling | new radios |
| Setup cost | higher at the start | lower at the start | lower for scattered areas |
Benefits of fiber for an ISP
Higher-speed plans
Fibre can carry far more bandwidth than copper, so you can sell 100 Mbps, 300 Mbps or gigabit plans and compete with national providers.
Fewer faults and lower running costs
Fibre is not affected by electromagnetic interference, moisture or lightning in the way copper is, and passive splitters need no power in the field. That usually means fewer complaints and fewer engineer visits.
Longer reach from one point
A single OLT port can serve subscribers spread across several kilometres through splitters, so you need fewer active devices in the field.
Future-proof network
Once the fibre is in the ground or on the poles, faster speeds come from upgrading equipment at the ends, not replacing the cable.
Happier subscribers
Stable speeds and fewer outages mean fewer “slow internet” complaints and better renewals.
What you need for an FTTH network
- OLT (optical line terminal) at your network centre
- Splitters (for example 1:8, 1:16, 1:32) to share one fibre among many homes
- Distribution and drop fibre cables, joint closures and patch panels
- ONU/ONT at each subscriber’s premises
- Core router / BRAS and RADIUS for authentication and plan speeds
- Upstream bandwidth sized for higher-speed plans
- Splicing and testing tools (fusion splicer, power meter, OTDR) or a partner who has them
For equipment prices and a sample budget, see FTTH business setup: equipment and cost. If you are building a new ISP from scratch, see
How to move subscribers from copper to fiber
- Start with dense areas: apartments and colonies where many subscribers share one route
- Plan splitter locations so each OLT port is well used
- Offer an upgrade plan: a faster speed for a small price increase encourages customers to switch
- Schedule installations by area to keep engineers efficient
- Keep the copper running in an area until most customers have moved
- Collect and record ONUs issued to each customer in your inventory
How FTTH changes billing and operations
- New plans at higher speeds, mapped to new speed profiles in RADIUS
- Equipment tracking: each ONU/ONT issued to a subscriber, with serial number and status
- Installation charges or deposits for the ONU, recorded on the customer’s account
- Complaint types change: fewer “slow speed”, more “fibre cut” and “ONU power” tickets
- More complex network, same simple billing: renewals, suspension and reconnection should still be automatic
ISP software that combines billing, RADIUS, inventory and complaints makes this easier. Read what ISP billing software is and how it works and how complaint management works for ISPs.
Frequently asked questions
A fiber cable connection delivers internet over optical fibre, which carries data as light. In FTTH, the fibre runs all the way to the subscriber’s home, where an ONU converts it into an Ethernet or Wi-Fi connection.
Fibre supports much higher speeds, works over longer distances without signal loss, isn’t affected by electrical interference and usually needs less maintenance, which means fewer complaints.
On common GPON networks, subscribers can typically be served up to about 20 km from the OLT, depending on splitter ratios and network design.
Billing stays recurring, but ISPs usually add higher-speed plans, record ONU equipment for each customer and may charge installation or deposits. A billing system with inventory tracking handles this easily.
Manage your FTTH network with ISPMate
ISPMate handles billing, RADIUS speed profiles, ONU inventory, installations and complaint tickets for FTTH ISPs in one system. Book a free demo: call +91-9310313545 or write to sales@ispmate.com.
